London hammer


The London hammer is made from an alloy of iron which is very modern in technology, which is encased in “100 million” year old rock (according to geologists) which has formed around it.

This ancient tool has a simple form, similar to the type of hammer that is still common in Germany today. The handle now is a very hard petrified crystal with an intact structure. It was possible to ascertain that the interior of the handle had partly turned into porous coal. There is no way to scientifically explain this combination of carbonization and petrification. I have not heard of a similar piece, found anywhere in the world. Two very different processes must have occurred simultaneously or in short succession. Crystal petrifaction requires an ecosphere of running water whereas for the development of porous coal, one could, for example, assume that fire was the necessary agent. Water and fire, it goes without saying, are two very different and mutually exclusive elements. The analysis of the subsiding of the Flood, to be undertaken at a later point in this book, will explain what now looks like a contradiction. The outer layers of the hammer handle reminded me of the petrified stumps and piles of wood I had seen earlier at the “Petrified Forest National Park” in Arizona, on a visit in 1988. The exhibits there, pieces of the cut up piles of wood, had completely petrified and displayed a homogenous crystal structure. I do not know of one piece discovered in that park to contain a coal interior comparable to that of the fossil hammer. The age of the trees there is officially estimated at between 100 and 200 million years. Wood petrifies when it is buried in silt deposited by flooding rivers or seas and silicates, such as are found in volcanic ash, dissolve and impregnate it. These substances replace the hydrogen and oxygen portions in the wood and begin the petrifaction process by silicification. This may produce very solid opal or quartz minerals. The final product is approximately 5 times as heavy as common pine wood. This short description of the hammer handle should make it obvious that the fossil hammer must be authentic and very ancient. In spite of all our modern technical abilities, it has never been possible to produce petrified wood with porous coal inside. It therefore is out of the question that such a hammer could be a hoax. I must clearly emphasize this point, as most artifacts which contradict the accepted view of the world we are accustomed to, are accused of being forgeries. Our traditional schools of thought, however, are at a loss to explain this hammer. Petrified wood, and therefore this ancient tool, is supposed to be at least 140 million years old. Official scientific authorities, however, say that humans capable of manufacturing high quality tools have only existed for a few recent millenia. Something concerning these datings and the enormous time intervals of the geological era must be erroneous. Is humanity really many millions of years old or is it a young species? Did the processes of rock formation take place more recently than is believed? Examination of the hammer. Before I look into these questions, I would like to give a more detailed description of the hammerhead’s characteristics in order to make the full extent of the mystery clear. Detailed research was carried out independently of one another by two different institutes. John Mackay, Director of Australia’s “Creation Science Foundation”, analyzed the hammer thoroughly during his visit to the United States. A number of Australian metallurgists, as well as those working at the respected metallurgic Institute “Batelle Memorial Laboratory” in Columbus, Ohio (USA), took part in these analyses. Sophisticated electron microscopes served to examine the structure and composition of the steel the hammerhead was made of. The results of the examinations were as mysterious as they were bewildering. The hammerhead, chemically speaking, consisted of 96.6 % iron, 2.6 % chlorine, and 0.74 sulphur. Incredibly, this material is almost entirely solid iron! Other additives or impurities were not detectable. Non-destructive testing methods of steel quality comprise x-ray examination, magnetic testing as well as ultrasonic detection. X-rays showed no evidence of inclusions or irregularities in the hammerhead steel. This means, it was tempered and hardened in some way. In general, chemically genuine and unworked steel is rather soft. The even structure determined, however, suggests that this hard steel that was manufactured by some sophisticated technology. The results of the examination are as sensational as they are unbelievable. Anyone with the slightest knowledge of steel manufacturing knows that every modern steel-making process, inevitably leads to carbon or silicon impurities! I emphasize the word inevitably. Steel production without these impurities is simply unthinkable! No other known ingredients used for refinement such as copper, titanium, manganese, cobalt, or molybdenum, vanadium, wolfram or nickel could be traced. We employ these and other elements in steel manufacturing to achieve different properties needed for different fields of application. The high quantity of the chlorine in the fossil hammerhead is remarkable, as well. Chlorine plays no part in modern steel manufacturing. It is not used at all today, so it is impossible to produce the high steel quality of the type found here by today’s manufacturing methods. This leads us to the question; who manufactured this hammer and when? Based on the standpoint of accepted research and science, it is impossible for this hammer to exist, much less to have ever been manufactured. For the reasons given, it is thus out of the question that we are dealing with a “hoax” hammerhead. Much the same has been shown concerning the hammer handle. Two forgery-proof materials for which we have no scientific explanation, combined in one tool. This is extraordinary evidence of a very different history of earth and humankind! If our school teachings are correct, there is no other conclusion than that an alien visiting earth must have lost the hammer. Still, I have one other more logical explanation to offer and I will present it in the further course of this book: My explanation, however, is not in accordance with traditional scientific theory. The fossil hammer shows still more peculiar features. In breaking open the hammer’s original stone enclosure in 1934, the upper edge of the metal head was damaged, leaving a small notch. The inside of the notch revealed a shiny silvery surface. Until today, more than 60 years later, the color of the notch has not changed. No traces of rust are perceptible. The relatively high concentration of chlorine combined with a total absence of carbon, which would cause corrosion by reacting with oxygen, may be responsible for this phenomenon…. – Hans Zillner in his book: Darwin’s Mistake